Pool Screen Repair Services Bradenton LTD

Screen Saver: How to Fix the Top of Your Pool Enclosure

Is your pool screen in need of repair? A damaged or worn-out pool screen can diminish the enjoyment of your outdoor space and leave you vulnerable to pesky insects and debris. But fear not, as help is at hand. 

This article will delve into pool screen repair, exploring common issues, effective repair methods, and the benefits of restoring your pool screen to its former glory. Get ready to dive in and uncover the secrets to a seamless, hassle-free pool screen repair.

You can sometimes fix the harm. Today’s article will show you how to determine whether a loss can be repaired and what to do.

How to Repair the Top of Pool Screen Enclosure Step by Step

It is possible to repair the top part of the screen enclosure if it has worn down due to the following reasons:

  • Sun degradation (warping, faded paint)
  • Holes caused by squirrels and pests
  • Corrosion caused by birds perched on the roof of the screen or proximity to the sea (salt, sand, and other minerals)
  • Mold on Fixtures and Casings

This first part will give you a guide on how to handle each situation.

How to Reduce Sun Damage on the Top of the Pool Screen Enclosure

Paint your pool enclosure to reduce sun damage. Direct-to-metal coatings can help your pool enclosure regain its former luster.

It is cost-effective and environmentally friendly, as you can recycle your old enclosures to make them last longer.

You will need these essential tools to complete this task:

  • Ladder
  • Direct-to metal paint
  • Safety equipment such as gloves and goggles
  • Plastic Sheets
  • Paint roller or brush
  • Paint tray

It is a very simple process.

  1. Use plastic sheets to cover the floor.
  2. Wear safety equipment
  3. Paint the tray inside;
  4. Place the ladder where you wish to begin;
  5. Paint with a brush or a paint roller.

How to Fix Holes at the Top of the Pool Screen Enclosure

Here’s what to do if the holes are manageable. You will need the following equipment to begin:

  • Screen repair kit patches
  • A cutting device, like scissors
  • Clear silicone caulking
  • Choose the closest color to the one that you are patching.
  • Paper towel or an old rag

Here’s how to proceed:

  1. The screen that you are repairing must be dry.
  2. Cut a small patch of porch screen large enough to cover the gap;
  3. Install silicone caulking around all edges.
  4. Put the patch over the hole.
  5. Clean the silicone caulking from the edges with a paper towel or an old rag.

How to Remove Mold and Corrosion From the Pool Screen Enclosure

You can remove the corrosion and mold on your pool enclosure in two ways.

First, you can use a pressure cleaner with an extension wand to reach the top beams on your screen frames. Do not spray the screen. Some pressure washers can damage the pool screen.

You can use a spray bottle or bug sprayer you purchase at your local hardware or pool supply store and fill it with chlorine or bleach.

How to Determine if the Damage Is Repairable

Damage caused by storms or bad weather (like hurricanes) is irreversible. If screens have been torn or pulled apart, it is best to replace them.

In addition, all of the damages mentioned in the previous section can be repaired, provided they are within reasonable limits. Small holes the size of marbles can be repaired. Fissures caused by stones or falling branches will be difficult to fix.

It is possible to fix the holes, but they will appear as a visible patch.

It is better to replace the screen enclosure when corrosion has reached a point where it’s destroying its surface.

Does It Make Sense to Repair the Top of the Pool Screen Enclosure?

Yes, in some cases, particularly if the damage to the screen is not so obvious and severe. Repairs may need to be more, depending on how worn out the screen is.

In the ideal case, you should evaluate and inspect the screen enclosure’s top condition. The more defects there are, the harder it is to move around without looking bad.

It is often better to replace the screen.


Repairing the top of your pool screen enclosure is feasible for issues such as sun degradation, small holes, and mold. However, it is important to assess the extent of the damage and consider factors such as the visibility of repairs and the overall condition of the enclosure. In some cases, replacement may be a more practical solution. Regularly maintaining and inspecting your pool screen can help prevent major damage and prolong its lifespan.

Don’t let a damaged pool screen dampen your enjoyment of your outdoor space. With the right knowledge and proactive steps, you can ensure that your pool screen remains functional and beautiful for years. Hire a professional like Pool Screen Repair Bradenton FL, a reputable company specializing in pool screen repair services in the Bradenton, Florida, area. 

We are skilled professionals who offer reliable repairs for damaged pool screens, ensuring that your outdoor space remains a comfortable and enjoyable environment. With a commitment to using high-quality materials and employing industry-leading techniques, we provide long-lasting results. If you need pool screen repair in Bradenton, don’t hesitate to contact us for exceptional service.


How can you clean the screen enclosure’s top?

Clean the screen enclosure; you’ll need a bucket of warm, sudsy water, dish detergent, a soft-bristled brush, and a garden hose. Then, gently scrub the screen enclosure and frame using the brush and warm, sudsy water. After rinsing them, let them air dry.

How can you repair a hole in a pool screen?

Cut out a small patch of porch screen large enough to cover the entire hole. Apply silicone caulking around all the edges. Place the patch over the hole. Use a paper towel or an old rag to clean the silicone caulking.

How can you clean the top part of a swimming pool enclosure?

Washing your enclosure with water and mild soap is a great way to keep it clean. Dish soap can also be used for this. Try stroking the enclosure using a soft bristle toothbrush during the cleaning process. Scrub up and down or side to side, front to back.

What is the best cleaner for screen enclosures?

A sunny day is all you need to clean your screen enclosure. You will also need a garden hose and mild dish soap mixed with warm water. After soaking:

  1. Use a soft-bristle brush to clean the screen enclosure.
  2. Spray down everything for a final rinse.
  3. Keep an eye on any areas that need extra attention.

Leave a Comment

Your email address will not be published. Required fields are marked *

Call Now Button